$5 Shipping when you spend $35+ (USA)



Monogrammed Initial on Magnetic Bottle Opener

Regular price $25.00

Shipping calculated at checkout.

Personalized Custom Magnetic Cast Iron Bottle Opener in 3 colors! Great gift for 6th Anniversary! Perfect Groomsmen or wedding party gift! Laser Engraved! Cap catcher.

Attach to your fridge, tailgate or any magnetic surface and start popping tops. Magnets catch the bottle caps! Watch them pile up! Note that these use very strong rare earth magnets so be careful with them as they have a real pull.

Materials: Pine, cast iron opener & magnets, gel stain
Customized with laser engraving (these are not vinyl, stickers or painted.Stain is used to bring out the lettering, as shown in the pictures)
Dimensions: 9 x 4 X 3/4 inches

COLOR VARIATIONS 

1) Pine with Aged Gray stain
2) Pine with red mahogany stain
2) Pine with walnut stain

STYLE VARIATIONS - choose from the drop down (when ordering add in a "Note to Seller" the letter and/or name you wish to have engraved on the front of the opener)

a) 1 Block Letter (add the SINGLE letter you want in notes)
b) 1 Calligraphy Letter (add the SINGLE letter you want in the notes)

IMPORTANT!-> THESE ARE CUSTOM WORKS AND ARE NOT RETURNABLE or EXCHANGEABLE - NO EXCEPTIONS!

These custom bottle openers do take 1-3 days more than our plain openers (3-5 days total turnaround until shipping). Usually it is the lower end of that estimate, but just be aware it does take longer.

We also sell a plain front - non-customized version of this item. You can find it here.

We welcome large quantities on this item. Please message us if you need a bunch for a wedding party or what have you. If you have a custom look you are looking for (not seen here), contact us and we can see what we can do for you.

Disclaimers:

** While we use the strongest magnets available to hold it to every metal surface, that some surfaces are inherently less metal than others (some fridges are more aluminum than others and less magnetic). Also, we always suggest that you use one hand to brace the bottle opener while you pop open your tops to ensure a good hold.

***The magnets in the back/middle of the item are INSET so that they are more at the front of the board. This is intentional and there are no magnets missing, they are simply set closer to the front in order to catch the caps.

****Wood has variation in grain, knots, and look (the pictures above are just an example of what you will receive so that you can get an idea of the customization). These are features and not flaws.

****Monogramming is done with a laser engraver and will be etched into the wood and then given a contrasting stain color to bring out the lettering (done with gel stain).

Customer Reviews

Based on 4 reviews Write a review